DH30 Portable Spot Welder

DH30 Portable Spot Welder It has a 0.91-inch OLED screen.

MAX 20 gea can now be installed, and MAX 0.2mm nickel steel belts can be weld.

Touch the button panel to make adjustments more convenient.

And you can see the input and output voltage and current on the screen.

Added 0.91″ OLED screen, which can display data.

Optimized design of the soldering pin dome, matched with our mainstream replaceable spot welding pen.

Charging interface:

Input voltage, current, power, power display.

Discharge interface:

Output voltage, current, power display;

Spot welding port:

Gear, power, welding count, trigger threshold, battery voltage

The trigger welding threshold can be set;

Automatic shutdown time can be set

Package contains:

Host *1

USB data charging cable*1

Spot welding pen*1 (a pair)

0.12*2m nickel sheet*1

And you can see the input and output voltage and current on the screen.

Portable Spot Welding DH30

It has a 0.91-inch OLED screen.

MAX 20 gea can now be installed, and MAX 0.2mm nickel steel belts can be welded.

Touch the button panel to make adjustments more convenient.

And you can see the input and output voltage and current on the screen.

Added 0.91″ OLED screen, which can display data.en.wikipedia.org

Please full charging before using!

The two needles of the spot welding pen cannot be touch together, which will cause a short circuit and burn the machine. The DH30 is new to the market, the response to the DD2.0 was not very good, so a mini spot welder that can weld 0.1-0.15mm nickel pieces in up to 30（MAX) positions was introduce. It has a 0.91″ screen, which makes it very easy to visualize the power level etc. It is very convenient and quickDH30 Specifications:Screen: 0.91 Inch OLED

Material: Metal Case

Battery Capacity: 5500mAh

Welding Output: 4.2V MAX 650A

USB Output:5V MAX 2.4A

Charging Port: Type-C

Product Size: 103x83x29mm

Package size: 143x107x48mmSpot Welding Power Setting:Start with the fit gear and increase the power slowly until it can be weld. Do not increase the power if it can be weld. Avoid MOS bombs. The black solder joints indicate that the power is too high.

When welding, press down the soldering pin lightly, and the nickel sheet and the battery can be bond together. The harder you press, the less solid the welding will be. It will automatically trigger after pressing down for one second.